With the increasing popularity of laser technology, many manufacturers in the stainless steel and other pipe industries have chosen Longxin laser pipe cutting machines. But, do you know the hidden risks in the daily operation of the laser pipe cutting machine?
Only by paying attention to details and following the operating procedures can it be better avoided. Longxin Laser will teach you how to use the laser cutting machine.
Here are some details that you must pay attention to:
1. The laser cutting head is a vulnerable item on the laser pipe cutting machine. If it is used for a long time, the laser cutting head will be damaged.
2. Check the straightness of the fiber laser cutting machine track and the verticality of the machine every six months, and maintain and debug in time if abnormalities are found. If you do not do this, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is the most important thing and must be done.
3. Once a week, use a vacuum cleaner to suck off the dust and dirt in the machine, and all electrical cabinets should be tightly closed to prevent dust.
4. Always check the steel belt of the fiber laser cutting machine and make sure it is tight. Otherwise, if there is a problem in operation, it may hurt people, and even cause death in serious cases. The steel belt seems to be a small thing, but it is a bit serious if something goes wrong.
5. The guide rails of the optical fiber laser pipe cutting machine should be cleaned frequently to remove dust and other sundries to ensure that the normal gear racks of the equipment should be wiped frequently and lubricated to ensure lubrication without sundries. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately while the machine is moving, and the quality of the cut products will be improved. .
6. When the equipment is in operation, the operator shall not leave the post without authorization or entrust someone to be in charge. If it is really necessary to leave, the operator shall stop the machine or cut off the power switch.
7. Put the fire extinguisher within easy reach; turn off the laser or shutter when not processing; do not place paper, cloth or other flammable materials near the unprotected laser beam.
8. Keep the laser, bed and surrounding areas clean, orderly, and free from oil, and the workpieces, plates, and waste materials should be piled up according to regulations.
9. When using gas cylinders, avoid crushing the welding wires to avoid electric leakage accidents. The use and transportation of gas cylinders shall comply with gas cylinder monitoring regulations. It is forbidden to expose the cylinder to the sun or close to the heat source. When opening the bottle valve, the operator must stand on the side of the bottle mouth.
